What Causes Rust Stains?
The presence of iron in water causes red-brown rust stains in your toilet bowl, tub, and sinks. The particles corrode as air reacts with them, and they accumulate on surfaces where water drips over time. If you reside in an older home, the iron might be coming from deteriorating pipes. The correct process may decrease the presence of iron and the deposits on the surfaces of your toilets and washbasins.
Ways to Remove Rust Stains
Although you may be tempted, resist using bleach to clean rust stains, and bleach will chemically charge rust spots, escalating the problem. Also, use clean techniques, devices, and cleaners with caution since scratching or damaging your toilet bowl would make stain removal nearly difficult in the future. Put on your gloves and goggles and try one of these effective rust-removal methods.
If you are not equipped with the right tools and equipment, seek professional assistance. Contact eco pro plumbing for sewage line problems or leak detection, and they offer the best plumbing and mechanical repair service. Eco pro plumbing provides a wide range of high-quality residential, commercial, and industrial services at reasonable prices.
To make cleaning simpler, open a window for ventilation and drain the water from your toilet bowl by turning off the valve and flushing. Here are a few tips for removing rust stains from a toilet bowl:
- Make sure you have a tough scrubber to chip away any rust stains. The scrubber shouldn’t damage the porcelain of your toilet bowl. A non-abrasive brush is typically the best option.
- Consider making your cleaning solution by combining one-part vinegar, water, and three parts baking soda. The paste made is powerful enough to remove tough stains without causing damage to your tools and toilet bowl.
- Wear protective eye/hand protection at all times. Even if you’re only using a cleaning solution made from household items, goggles and gloves are essential for keeping yourself clean and safe during the scrubbing process.
- Turn off the water supply and drain the toilet bowl of most of the water. You don’t want any water in your bowl spilling back on you, and extra water will hinder your cleaning.
- Turning off the water supply to your toilet is normally found in the rear of the bowl; if you can’t find it, turn off the water supply to your entire house.
- If your DIY cleaning solution does not work, go for a professional cleaning product like Borax. This product must remove most rust stains.
- When you are finished, thoroughly clean your work area. To keep your bathroom clean and healthy, you shouldn’t leave any water or rust behind after finishing your cleaning.
Tips to prevent rust stains from the toilet, tub, and sinks
- Clean Regularly: Washing your bathroom once a week will keep surfaces clean and avoid any accumulation of iron and other deposits.
- Keep the Washroom Dry: Wipe off washroom surfaces exposed to water as much as possible to minimize iron residue build-up.
- Keep an Eye on Metals: Air fresheners with metal bottoms can also cause rust stains on bath surfaces. Place them in a cabinet or cupboard – not on bath or sink ledges.
- Install an Iron Filter or Water Softener: Using water filters and purification systems can eliminate the staining problem at the source, removing iron and other minerals in the water. (Some softener salts are even designed to combat rust.
Upgrade Plumbing: Older homes with iron pipes may continue to develop rust deposits until the pipes are upgraded. It is important to upgrade the pipes when necessary.
