It’s essential to identify the cause and resolve the issue if your toilet bowl’s water level is too high or too low. Here are some ways to change the water level in a toilet bowl. Fortunately, the causes and treatments are typically straightforward, and you can perform them yourself. Like other plumbing problems, the trick is to spot the source quickly and take appropriate action. If you wait to make the repairs, the situation will worsen, and you may need to spend much more money repairing it than if you had done something about it right away.
Contact Eco Pro plumbing for the best plumbers in Cambridge. They offer a variety of services at affordable prices. Their services include faucet repairs, sump pump installation, and drain cleaning plumbing services.
Depending on whether the water level in your toilet bowl is too high or too low, you must adjust it appropriately. Let’s explore the different approaches to each situation at a time.
When the Water Level is High
- Unclogging Pipes
If your toilet usually flushes, but the water level in the bowl is excessive, the clogged pipes are likely the reason. When you flush the toilet, water does not exit; instead, it remains in the bowl. When there is a significant blockage, the water will stay in the bowl constantly rather than gently decreasing as it slowly drains. Eventually, water will overflow the bowl and toilet seat and end up on your bathroom floor if you keep flushing.
There is a quick measure you may perform if you think this is the issue you are having. Pour some water into the toilet bowl from a bucket. It is fair to presume you have a blockage if the water in the toilet bowl doesn’t flush out. To start fixing the issue, put on a pair of rubber gloves and reach into the toilet bowl to examine whether any larger objects, such as diapers or tampons, are obstructing the toilet.
The next step is to try unclogging it with a plunger in case the obstruction is lower down the pipe if you cannot detect anything. If the plunger doesn’t work, you might try using chemical goods to unclog the toilet or pouring boiling water down it. If none of these methods work, it might be time to call a professional.
When the Water Level is Low
- Modifying the Tank’s Water Level
There are several reasons why the water level in your toilet bowl could be too low. The most prevalent one will have to do with what’s happening inside your toilet tank, so you should check that first.
Check the water level in the tank after removing and setting aside the tank cover. If it is much lower than this, you will need to raise the water level in the tank. Ideally, it should be about an inch below the overflow tube and fill valve.
- Clean the Plumbing Vents
If the tank is not the issue, there can be a problem with the plumbing vents in your house. Vents allow air to enter a plumbing system to maintain the proper pressure. If the vents are clogged, the water won’t flow properly, and air won’t be able to enter.
- A Damaged Toilet
Check for hairline cracks if you cannot identify any other causes for the low water level in your toilet bowl. Every time you flush, you may leak if you notice that the water level gradually decreases. However, the leak or break may be below the floor level, so puddles of water won’t always be apparent, although finding water on the floor is another sign.
If your toilet is broken or you have any other leak, you should take care of it as soon as you can because, if you don’t, it could cause severe structural damage to your house that would be expensive to fix.